nudedaa.blogg.se

Meade magellan 1 installation
Meade magellan 1 installation










Now you can spend your time observing objects, not searching for them.

meade magellan 1 installation

This unit sells for $295.00 PLUS shipping. I'll through in the 9 volt duracell to make up the difference. 005 allen wrench which I am sure you can pick up anywhere. I have all parts and manuals including installation instructions. I had it on my 12.5 but I bought a ETX125 and I thought 1 goto was enough. Meade LS 6 and 8), unless you use a SkyFi or similar Wifi adapter.Īdditionally, basic ASCOM is supported for the Windows version, so that if your telescope mount isn't listed above, you can use the ASCOM driver of your choice (note that only telescopes can be driven via the ASCOM system, not focusers, etc.This kit comes complete and ready to install on your Meade 6,8,10,or 12.5 or 16". In particular, mounts that communicate via a USB port will probably not be controllable (e.g. Note that mounts that are not accessed via an RS-232 serial port or Ethernet port are not supported, unless they have a driver for the OS that emulates a serial port. These drivers are available for both Mac and Windows. Telescope mount compatibilityĪstroPlanner V2.3 has built-in drivers for the following computerised telescopes and mounts: Astro-Physics GTO You'll need at least 350MB of disk space, and for a complete installation with all optional catalogues, 2GB+ of disk space. WindowsĪstroPlanner V2 requires Windows 7 SP 1 or later.

meade magellan 1 installation

Mac OS XĪstroPlanner V2 requires Mac OS X 10.11 or later. If you are connecting to a telescope, you'll also need a built-in serial port, an USB-to-Serial converter (the Keyspan products are recommended), or a SkyFi/ StarSeek WiFi-to-serial device. AstroPlanner is a 64-bit application (a 32-bit Windows version is available).įor both platforms a screen with an absolute minimum size (width and height) of 1024 x 600 pixels is required.












Meade magellan 1 installation